GEL 2432 – MiniCODER with SINCOS and TTL
The GEL 2432 MiniCoder is a sensor element that generates a sin/cos or square-wave output from a ferro-magnetic tooth-wheel or measuring rod. High resolution can also be provided by internal interpolation of square-wave signal. Rotary and linear motion can be detected and applications include registering movement of piston rods on diescasting machines, contactless measurement of […]
GEL 8240 MotionPLC
With the GEL 8240 cam-plate controller we have combined the Control Panel with the PLC to form a multifunctional compact control for a great variety of uses. Lenord + Bauer GEL 8240 motion PLC The Motion PLC combines a cam-plate controller, Control Panel, PLC and numerous inputs / outputs to a powerful automation unit. GEL […]
Know Your Duty Cycles
The International Electrotechnical Commission (IEC) has eight classifications for duty cycles to designate a motor’s operating conditions. It’s extremely important to know the differences and to note what mode of operation each rating refers to. When specifying a motor, it’s worth talking to a supplier that can give advice on such matters to ensure you […]
Do this before you send a servo motor to a repairer
If you’re sending a servo motor to a repairer you don’t know, it’s worth taking this one very simple precaution before you do. In fact, even if you know and trust the repairer, it’s still worth doing this just to be on the safe side. If you don’t and the repairer overlooks it then you […]
‘Did You Miss This’ Survey
Fuji Techno – HYM Super Metering Pumps
The HYM series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for laboratory trials, small batch production and specialist requirements. The HYM series SMPs provide flow rates following flow rates dependent on the plunger size: HYM-03, plunger diameter 3mm, maximum flow rate 15.3ml/min HYM-06, plunger diameter 6mm, maximum flow rate […]
Fuji Techno – HYSD Super Metering Pumps
Super Metering Pumps are precision instruments for feeding liquids accurately, at pre-determined volume, into a process or system. The accuracy is essential for applications such as micro-reactors and continuous flow reactors. The HYSD series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for large scale production, delivering flow rates up to […]
Fuji Techno – HYSA Super Metering Pumps
The HYS-A series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for small scale production. The HYS-A series SMPs provide flow rates from around100ml/min up to 2.3l/min at discharge pressures up to 980Bar. There are various metalic liquid head types available for different applications including Stainless Steel (SUS316), Hastelloy and […]
Festo – EGC-TB linear tooth-belt driven actuator
Efficiency, maximum dynamic response and speed with further improved rigidity – as a toothed belt or ball screw driven linear actuator Features New aluminum profiles with exterior guide: increased rigidity and improved efficiency thanks to downsizing (smaller size with the same load) Guide closer to the load: smaller lever arm for large maximum load and […]
Festo – linear tooth-belt driven actuator ELGR
The ELGR linear actuator is an ideal choice for cost sensitive applications requiring a simple yet reliable means of movement. The innovative construction also provides easy and flexible means of installation. Features Three sizes 35, 45 and 55 Ideal price/performance ratio Ready-to-install unit for quick and easy configuration Excellent reliability thanks to tested service life […]
Festo – EGC-BS, linear ball-screw driven actuator
Efficiency, maximum dynamic response and speed with further improved rigidity… Features New aluminum profiles with exterior guide: increased rigidity and improved efficiency thanks to downsizing (smaller size with the same load) Guide closer to the load: smaller lever arm for large maximum load and torques Motor connection on both sides (right/left) and both ends of […]
Metronix – ARS 2300 series
The ARS 2000 servo positioning controllers (ARS servo 2nd generation) are intelligent AC servo inverters for operation direct from a three-phase mains supply. They are flexible and can be easily adapted to a number of different applications, with many adjustment and expansion options. In addition to speed and torque control, positioning, speed and angle synchronisation […]
Metronix – ARS 2100 series
The ARS 2100 servo positioning controllers (ARS servo 2nd generation) are intelligent AC servo inverters for operation direct from a single-phase mains supply. They are flexible and can be easily adapted to a number of different applications, with many adjustment and expansion options. Due to the integrated Power Factor Correction the device already fulfils the […]
Metronix – ProfiNET Technology Module
for the ARS 2002-FS series servo positioning drives Metronix ARS 2000-FS servo positioning drives can now be fitted with the ProfiNET technology module for quick and easy integration into a ProfiNET IO network. Features The control of the drive is carried out using function and data-blocks, which will already be familiar from the communications protocol ProfiBUS. […]
Metronix – DIS 2-48/10 decentralised servo drive
The DIS-2 48/10 is a fully digital AC servo controller for three-phase synchronous and PM DC motors with a supply voltage of 24..48 V DC.The DIS-2 is optimally suitable for the decentralized employment. It can be mounted directly to the terminal block of the motor or used as a stand alone unit.There are a number […]
Whatever you want
Our philosophy has always been about supplying customers with exactly what they need, and not what we want to sell, as can be the case with some suppliers. This means we’re called on to help with really diverse projects from designing the most high-tech automation systems to trying to find replacements for components that are […]
New test and programming unit for sensors has WIFI web interface
Lenord+Bauer has launched a new test and programming unit. The GEL 211 for its GEL 2444x series sensors with sin/cos output 1 Vp/p and reference signal. It is used for easily checking the signals for compliance with adjustable tolerance limits. This includes sin/cos signals (amplitude, offset and phase offset), reference signal (amplitude, offset, position and […]
Have you seen our article on the MACK Tron servo motor in the latest issue of Industrial Technology magazine?
A new range of ultra-compact servo motors with integrated drives has been launched by Motor Technology. The new Mack-Tron motors, manufactured by Axor Industries, have been designed to satisfy the demands for quick and simple cabling with an excellent performance to size ratio. Ideally suited for decentralised applications, the ultra-compact format allows for installation where […]
MicroSPEED plus – panel mount DC servo drives up to 4kW (MCSP)
The MICROSPEEDplus® servo amplifiers are ultra compact modules, the ideal solution for incremental motion control, velocity loop and positioning systems which require fast response, high torque at low speed, smooth speed control and high reliability. Power supply from 60 to 200 VDC with output current up to 20 Amps continuous / 40 Amps peak. Tacho-generator, […]
New Motion Coordinators run remote servo
Trio has launched a new concept in high performance Motion Coordinators dedicated to running remote servo and stepper drives via the EtherCAT real time automation bus. Based on an up-dated version of the 532MHz ARM 11 processor the new MC4N Mini EtherCAT Master is ideal for high axis count machines or robotic applications. The MC4N […]