FastBACK Power Cables
![](https://motec.co.uk/wp-content/uploads/2019/10/Axor-fast-back-power-cables-1024x278.png)
Pre-assembled power & signal cables for “plug-n-play” connections to the Fast-Back® brushless servomotors. The CBLS cable must be used in accordance with the relevant service manual of the servodrive! All cables suitable for robotic applications. rque range is from 1.0 to 11 Nm. In conjunction with the MACK DRIVE servo drives, they offer an extremely […]
Fuji Techno – HYM Super Metering Pumps
![SMP - Super Metering Pump](https://motec.co.uk/wp-content/uploads/2020/05/Fuji-Techno-HYM-Super-Metering-Pumps-1024x251.jpg)
The HYM series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for laboratory trials, small batch production and specialist requirements. The HYM series SMPs provide flow rates following flow rates dependent on the plunger size: HYM-03, plunger diameter 3mm, maximum flow rate 15.3ml/min HYM-06, plunger diameter 6mm, maximum flow rate […]
Fuji Techno – HYSD Super Metering Pumps
![](https://motec.co.uk/wp-content/uploads/2020/05/HYS-B-SMP-with-stainless-steel-liquid-head-1024x242.png)
Super Metering Pumps are precision instruments for feeding liquids accurately, at pre-determined volume, into a process or system. The accuracy is essential for applications such as micro-reactors and continuous flow reactors. The HYSD series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for large scale production, delivering flow rates up to […]
Fuji Techno – HYSA Super Metering Pumps
![](https://motec.co.uk/wp-content/uploads/2020/05/HYS-A-SMP--1024x252.png)
The HYS-A series super metering pumps (SMP) offer a solution for accurate pumping and dosing applications for small scale production. The HYS-A series SMPs provide flow rates from around100ml/min up to 2.3l/min at discharge pressures up to 980Bar. There are various metalic liquid head types available for different applications including Stainless Steel (SUS316), Hastelloy and […]
Festo – EGC-TB linear tooth-belt driven actuator
![](https://motec.co.uk/wp-content/uploads/2020/04/belt-driven-linear-actuator-EGC-TB-1024x482.jpg)
Efficiency, maximum dynamic response and speed with further improved rigidity – as a toothed belt or ball screw driven linear actuator Features New aluminum profiles with exterior guide: increased rigidity and improved efficiency thanks to downsizing (smaller size with the same load) Guide closer to the load: smaller lever arm for large maximum load and […]
Festo – linear tooth-belt driven actuator ELGR
![](https://motec.co.uk/wp-content/uploads/2020/04/Festo-–-linear-tooth-belt-driven-actuator-ELGR-1-1024x251.jpg)
The ELGR linear actuator is an ideal choice for cost sensitive applications requiring a simple yet reliable means of movement. The innovative construction also provides easy and flexible means of installation. Features Three sizes 35, 45 and 55 Ideal price/performance ratio Ready-to-install unit for quick and easy configuration Excellent reliability thanks to tested service life […]
Festo – EGC-BS, linear ball-screw driven actuator
![](https://motec.co.uk/wp-content/uploads/2020/04/Festo-–-EGC-BS-linear-ball-screw-driven-actuator-IMG-1-1024x255.jpg)
Efficiency, maximum dynamic response and speed with further improved rigidity… Features New aluminum profiles with exterior guide: increased rigidity and improved efficiency thanks to downsizing (smaller size with the same load) Guide closer to the load: smaller lever arm for large maximum load and torques Motor connection on both sides (right/left) and both ends of […]
Metronix – ARS 2300 series
![](https://motec.co.uk/wp-content/uploads/2020/04/ARS2000-series-white_1500x600-1024x410.jpg)
The ARS 2000 servo positioning controllers (ARS servo 2nd generation) are intelligent AC servo inverters for operation direct from a three-phase mains supply. They are flexible and can be easily adapted to a number of different applications, with many adjustment and expansion options. In addition to speed and torque control, positioning, speed and angle synchronisation […]
Metronix – ARS 2100 series
![](https://motec.co.uk/wp-content/uploads/2020/04/ARS_2102_FS_banner_v1_1500x600-1024x410.jpg)
The ARS 2100 servo positioning controllers (ARS servo 2nd generation) are intelligent AC servo inverters for operation direct from a single-phase mains supply. They are flexible and can be easily adapted to a number of different applications, with many adjustment and expansion options. Due to the integrated Power Factor Correction the device already fulfils the […]
Metronix – ProfiNET Technology Module
![](https://motec.co.uk/wp-content/uploads/2020/04/Metronix-Profinet-Tecnnology-Module-1024x320.png)
for the ARS 2002-FS series servo positioning drives Metronix ARS 2000-FS servo positioning drives can now be fitted with the ProfiNET technology module for quick and easy integration into a ProfiNET IO network. Features The control of the drive is carried out using function and data-blocks, which will already be familiar from the communications protocol ProfiBUS. […]
Metronix – DIS 2-48/10 decentralised servo drive
![](https://motec.co.uk/wp-content/uploads/2020/04/Metronix-DIS-2-48-10-decentralised-servo-drive-1024x291.png)
The DIS-2 48/10 is a fully digital AC servo controller for three-phase synchronous and PM DC motors with a supply voltage of 24..48 V DC.The DIS-2 is optimally suitable for the decentralized employment. It can be mounted directly to the terminal block of the motor or used as a stand alone unit.There are a number […]
New test and programming unit for sensors has WIFI web interface
![](https://motec.co.uk/wp-content/uploads/2020/04/MiniCoder-GEL-211-WLAN-1024x487.jpg)
Lenord+Bauer has launched a new test and programming unit. The GEL 211 for its GEL 2444x series sensors with sin/cos output 1 Vp/p and reference signal. It is used for easily checking the signals for compliance with adjustable tolerance limits. This includes sin/cos signals (amplitude, offset and phase offset), reference signal (amplitude, offset, position and […]
MicroSPEED plus – panel mount DC servo drives up to 4kW (MCSP)
![](https://motec.co.uk/wp-content/uploads/2020/12/AX-D-MCSp-drive-1200x600-1-1024x512.jpg)
The MICROSPEEDplus® servo amplifiers are ultra compact modules, the ideal solution for incremental motion control, velocity loop and positioning systems which require fast response, high torque at low speed, smooth speed control and high reliability. Power supply from 60 to 200 VDC with output current up to 20 Amps continuous / 40 Amps peak. Tacho-generator, […]
LSN series brushless servomotor
![](https://motec.co.uk/wp-content/uploads/2020/11/LSx-motors-1024x683.jpg)
The LSN synchronous servomotors from LTi are brushless three-phase motors for high-end servo applications and are available in all speed and voltage variants furthermore they are particularly suitable for positioning tasks on machine tools, industrial robots, transfer lines, etc., as well as for applications with high demands on dynamic performance and stability. The standard models […]
MackMOTOR Brushless Servo motor (MKM)
![](https://motec.co.uk/wp-content/uploads/2019/10/MKM-Range-Header-1024x273.jpg)
The new MACK MOTOR range of sinusoidal Brushless Servo Motors (8 poles) are compatible with AXOR’s servo drives Mack Drive, MiniMagnum and Magnum 400 and are available with medium or high inertia rotors. Torque range is from 1.0 to 11 Nm. In conjunction with the MACK DRIVE servo motor drives, they offer an extremely low-cost […]
DynaSET worm-wheel sets
![](https://motec.co.uk/wp-content/uploads/2020/11/GT-G-Dynaset-Worm-Wheel-Sets-1024x512.jpg)
DynaSET worm-wheel sets can be specified for OEM applications where a complete gearbox is not desirable, either on technical or ecconomic grounds. The worm-wheel sets are supplied loose, comprising the worm-shaft and wheel only. The DynaSET worm-wheel sets can also be supplied with the backlash adjuster (mounted and pre-loaded) which includes the front and rear […]
MK Series, miniature metal bellows couplings
![](https://motec.co.uk/wp-content/uploads/2020/11/csm_NEUPraezis.-Miniaturbalg_03_f44eb77779-1024x360.jpg)
BACKLASH FREE AND USER FRIENDLY: MINIATURE BELLOWS COUPLINGS Where torques as low as 0.05 Nm are to be transmitted and shaft diameters as small as 1mm are to be connected, the miniature bellows couplings, MK series, are the right choice. As a result of the trend toward miniaturization – for example, in medical technology, laboratory […]
Stepper Motors
![](https://motec.co.uk/wp-content/uploads/2019/10/LAM-Technologies-Stepper-Motors-1024x249.png)
The LAM stepper motors are characterized by high torque, compact size and low rotor inertia. The available torque ranges from 0.28Nm up to 21Nm while the phase current is between 0.6A and 12A. All the models have square frame. The motors have a step angle of 1.8° and are optimized for the MicroStep drives, which […]
SAX 100 brushed DC Servo motors
![](https://motec.co.uk/wp-content/uploads/2019/10/Axor-SAX-100-Brushed-DC-Servo-motor.png)
SAX DC servo motors with permanent magnets are traditional, easy-to-use, motors that are extremely reliable and efficient. They have a favourable cost to performance ratio and are perfectly designed for use with the Microspeed, Minispeed and Masterspeed Servo Amplifiers and range from 0.045 to 2.7Nm. These servo motors (thanks to their permanent magnets) give high […]
SK Series, Torque limiting couplings
![](https://motec.co.uk/wp-content/uploads/2020/11/csm_PK_SKTu__v_ca8d2df126-1024x360.jpg)
The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring a higher degree of precision. They are becoming faster, using servo and DC drive technology, and they are more rigid to withstand the dynamic loads necessary to increase capacity and productivity. Torque overloads caused by […]