CAN IO – 8-in / 4-out Analogue (P826)
![Trio CAN I_O range](https://motec.co.uk/wp-content/uploads/2020/07/Trio-CAN-I_O-range-2-1024x683.png)
The CAN Analogue I/O module offers a compact DIN rail mounted analogue input/output capability for Trio Motion Coordinators. Each module provides 8 channels of 12-bit (+/-10V) analogue inputs and 4 channels of 12-bit (+/-10V) analogue outputs. Up to 4 modules may be connected to the CAN link which may be up to 100m long, considerably reducing […]
CAN IO – 16-in / out Digital (P319)
![Trio CAN I_O range](https://motec.co.uk/wp-content/uploads/2020/07/Trio-CAN-I_O-range-2-1024x683.png)
The Trio CAN16 Input/Output module offers a compact DIN rail mounted I/O expansion capability for all Trio Motion Coordinators. Up to 16 P319 modules may be connected to the CAN network which may be up to 100m long. This provides 256 distributed bi-directional input/output channels at 24Vdc level. All input points are high level, (24V […]
CAN IO – 16-in Digital (P318)
![Trio CAN I_O range](https://motec.co.uk/wp-content/uploads/2020/07/Trio-CAN-I_O-range-2-1024x683.png)
The Trio CAN16 Input module offers a compact DIN rail mounted output expansion capability for all Trio Motion Coordinators. Up to 16 P318 modules may be connected to the CAN network which may be up to 100m long. This provides 256 distributed input channels at 24Vdc level. All input points are high level (24V in […]
CAN IO – 16-out Digital (P317)
![Trio CAN I_O range](https://motec.co.uk/wp-content/uploads/2020/07/Trio-CAN-I_O-range-2-1024x683.png)
The Trio CAN16 Output module offers a compact DIN rail mounted output expansion capability for all Trio Motion Coordinators. Up to 16 P317 modules may be connected to the CAN network which may be up to 100m long. This provides 256 distributed output channels at 24Vdc level. All points are short-circuit proof and completely isolated […]
Euro404 / Euro408 (P831, P832, P833 and P834)
![The Euro404 and Euro408 Motion Coordinators are designed to provide a powerful yet cost effective control solution for OEM machine builders](https://motec.co.uk/wp-content/uploads/2020/07/euro404-408-1-1024x234.png)
The Euro404 and Euro408 Motion Coordinators are designed to provide a powerful yet cost effective control solution for OEM machine builders that are prepared to mount the unit and provide the power supplies required. The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be […]
MC403 / MC403Z (P821, P822, P823, P824 and P825)
![The MC403 is a high specification Motion Coordinator using a high performance ARM11 processor, with three flexible axis ports and two Voltage outputs.](https://motec.co.uk/wp-content/uploads/2020/07/MC403-1024x205.png)
The MC403 is a high specification Motion Coordinator using a high performance ARM11 processor, with three flexible axis ports and two Voltage outputs. The built-in Ethernet port allows programming and connection of common HMI and PLC protocols directly to the MC403. User programs can be written in Trio’s established multi-tasking TrioBASIC language using the powerful […]
MC405 (P826 and P827)
![MC405 Motion coordinator](https://motec.co.uk/wp-content/uploads/2020/07/MC405_1600x400-1024x284.jpg)
The MC405 is a high specification Motion Coordinator using a high performance ARM11 processor, with five flexible axis ports and four Voltage outputs. The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be used as pulse and direction with stepper or servo drives or […]
MC508 (P848 and P849)
![The MC508 is a high specification Motion Coordinator using an ARM Cortex A9 800 Mhz Processor, with 8 Voltage outputs & 8 flexible axis ports](https://motec.co.uk/wp-content/uploads/2020/07/MC508-1-1024x205.png)
The MC508 is a high specification Motion Coordinator using a high performance ARM Cortex A9 800 Mhz Processor, with eight Voltage outputs and eight flexible axis ports, that can be configured for up to sixteen pulse and direction output axes or eight closed loop servo axes. It boasts 128 MBytes of RAM; 32 of which […]
MC4N-RTEX (P906, P907, P908, P909, P910)
![The MC4N-RTEX extends the MC4N range of Motion Coordinators for networked drives which started with the MC4N-ECAT Motion Coordinator](https://motec.co.uk/wp-content/uploads/2020/07/MC4N-RTEX-and-2-drives1-1-1024x219.png)
MC4N-RTEX. It is dedicated to running remote servo drives via Panasonic’s RTEX Real Time EXpress automation bus. It is based on an up-rated version of the 532MHz ARM processor with VFP3 and is available with configurations from 2 to 32 axes making it ideal for high axis count machines or robotic applications. The MC4N-RTEX supports […]
MC664 and MC664X (P891 P862)
![The new MC664 single axis core A9 processor. The P861 MC664 Single Core Motion Coordinator is a “drop-in” replacement for its predecessor the MC464 Configure the controller functionality and connectivity by attaching up to 7 half-height expansion modules or 3 full-height expansion modules](https://motec.co.uk/wp-content/uploads/2020/07/MC664-1-1-1024x205.png)
The new MC664 single axis core A9 processor. The P861 MC664 Single Core Motion Coordinator is a “drop-in” replacement for its predecessor the MC464 Configure the controller functionality and connectivity by attaching up to 7 half-height expansion modules or 3 full-height expansion modules. Using the expansion modules allows the MC664 to support up to 64 […]
MC6N-ECAT (P960 P961 P962 P963 P964 P965)
![The MC6N supports up to 64 axes of motion with 64 bit integer position registers for ultra precise axis resolution.](https://motec.co.uk/wp-content/uploads/2020/07/p960-0051-1024x205.png)
The MC6N supports up to 64 axes of motion with 64 bit integer position registers for ultra precise axis resolution. EtherCAT slave drives and I/O can be connected and run in cyclic synchronous position, speed or torque modes provided these are supported by the drive. The built-in Ethernet port allows programming and connection of common […]
Flex-6 Nano (P600, P601, P602, P603, P604 and P605)
![Flex 6 Nano Integrated EtherCAT Controller](https://motec.co.uk/wp-content/uploads/2020/07/Flex-6-Nano-Integrated-EtherCAT-Controller-1-1024x256.png)
The Flex-6 Nano is a powerful DIN rail mounted stand-alone flexible and compact Motion Coordinator. Its on board memory can be expanded to 32 GByte using a Micro SD card. The Flex-6 Nano can be used as a stand-alone controller or can “plug” straight into our EtherCATFlexslice System allowing expansion of the system to include […]
PC-MCAT 64 (P760)
![](https://motec.co.uk/wp-content/uploads/2020/07/P760_1600x400-1024x256.jpg)
Trio’s PC-MCAT 64 is an innovative “Motion + PC Solution”. A powerful quad core Intel Atom processor is used to drive both a high performance motion controller and a compact PC that can run user applications under Windows. The PC-MCAT software uses a real-time extension to allow both Windows and the motion controller to run […]
DynaBOX servo worm gearboxes
![](https://motec.co.uk/wp-content/uploads/2020/11/Dyn_exp_blue-_combi_1-1024x388.jpg)
DynaBOX gearboxes have prooven themselves in servo motor applications over decades. The worm-wheel sets are designed specifically for precise, dynamic motion tasks. The materials, processes used and the unique worm-wheel design provide an over 90% contact pattern, giving the DynaBOX gearboxes in excess of 25,000 hours life expectancy and input speeds of up to 6000rpm. […]
BK Series, metal bellows drive couplings
![](https://motec.co.uk/wp-content/uploads/2020/11/csm_Metallbalg_c819250a86-1024x360.jpg)
HIGH PRECISION, ZERO BACKLASH, AND TORSIONALLY STIFF: METAL BELLOWS COUPLINGS High precision bellows couplings are used wherever positional accuracy and dynamic motion are in demand. This can be in medical devices, test stands, wind power turbines, servo axes in machine tools, wood processing machinery, packaging machinery and many more high performance equipment types. BK Series […]
DynaSET XL worm-wheel sets
![](https://motec.co.uk/wp-content/uploads/2020/11/DynaSET-XL-banner-1024x438.jpg)
DYNASET XL high-torque worm-wheel sets can be specified for OEM applications where a complete gearbox is not desirable, either on technical or ecconomic grounds. The worm-wheel sets are supplied loose, comprising the worm-shaft and wheel only. The DynaSet XL worm-wheel sets can also be supplied with the backlash adjuster (mounted and pre-loaded) which includes the […]
DynaBOX XL servo worm gearbox
![](https://motec.co.uk/wp-content/uploads/2020/11/Dyn_XL_exp_blue-_combi_1-1024x438.jpg)
DYNABOX XL high torque gearboxes can be specified as either MEDIUM or EXPERT units with lower than 5 or 0.5 arc-minute of backlash respectively. The degree of backlash is adjustable on the EXPERT version. They offer a space-saving design, are quiet / smooth running and maintenance free. Mounting options Hollow shaft via taper lock Single […]
ATEX – SP series planetary gearboxes
![](https://motec.co.uk/wp-content/uploads/2020/07/ATEX-SP-series-gearboxes-1024x309.png)
The ATEX SP gearboxes are designed for applications where high demands are made on precision, performance and reliability, with the added benifit of ATEX approval. The gearboxes are suitable for intermittent input speeds up to 4500rpm and offer high efficiency. The ATEX SP gearboxes offer low backlash down to ≤ 4 arc-min. Features Highly dynamic […]
REP planetary gearboxes series
![REP planetary gearboxes](https://motec.co.uk/wp-content/uploads/2020/07/REP-planetary-gearbox-1024x275.png)
REP gearboxes are built for servo applications where high demands are made on precision, performance and reliability. The gearboxes are suitable for intermittent input speeds up to 6000rpm and offer high efficiency. REP gearboxes offer low backlash down to ≤ 4 arc-min. Features Highly dynamic Low backlash and intertia High efficiency: 1 stage – 96% […]
EP series planetary gearboxes
![EP series planetary gearboxes](https://motec.co.uk/wp-content/uploads/2020/07/EP-planetary-gearbox-e1677671513557-1024x458.png)
The EP gearboxes are general purpose planetary units suitable for use with servo, stepper and other types of motors. The EP gearboxes offer medium backlash, mathematically accurate ratios up to 100:1 and high efficiency. One and two stage versions of the gearboxes are available and they are suitable for intermittent input speeds up to 5000rpm. […]