Our robust speed, vibration and temperature sensors deliver reliable information about the condition of your system, enabling you to detect malfunctions at an early stage and avoid unplanned downtimes.
Alternatively, you can use a CombiCODER to acquire rotational speed, temperature and acceleration in a single pick-up encoder if the installation space is tight.
Our speed sensors
detect rotational and linear motion of a measuring scale that is structurally separated from the sensor like target wheels or measuring rods. Thanks to the magnetic sensing principle they are particularly suited for continuous operation in durable capital goods.
Additionally, they are also protected against extreme weather conditions, humidity, shock, and vibration due to an encapsulation process and specially developed production methods. Thus they are in compliance with DIN EN 50155 and meet the requirements of protection class up to IP 68.
Our temperature sensors
use resistance thermometers that feature an almost temperature-linear resistance curve, and output the resulting measurement data as electrical signal.
They are suitable for a measurement range from -40 °C to +250 °C. A thin stainless steel tube protects the electronics from dirt, humidity and corrosion, allowing the sensors to meet the requirements of protection class IP 68. The sensors are in compliance with fire protection standards EN 45545 and are type-tested according to EN 50155.
Our vibration sensors
are mainly used to measure the tower oscillation of wind turbines. Even though conventional, mechanical oscillation sensors provide reliable measurement in the high frequency range, they experience problems with low frequencies as produced in wind turbines.
For this reason, our tower oscillation monitors work with micro-electro-mechanical systems (MEMS), which acquire oscillations in a frequency range of 0 to 10 Hz.
They are extremely robust, dew-point resistant, and in accordance with IP 67. The sensors are not subject to ageing, and provide wear-free and maintenance-free operation.
Speed, Vibration and Temperature sensors
GEL 2475CM
The CombiCODER GEL 2475CM is an advanced sensor that has been speciallydeveloped for Condition Monitoring applications in railwayvehicles. The speed
GEL 244xm
Configurable speed and position sensor with Mitsubishi interface. MiniCODER GEL 2449M/GEL 2444M General Information ■ The measuring system comprises a
GEL 2740
The GEL 2740 is a multichannel rotary encoder, available in models 2701-2710. They offer unmatched versatility with mounting options for
GEL 2475MS
The GEL 2475MS Is a multisystem sensor with various signal pattern combinations. The GEL 2475MS is a proven speed sensor using
GEL 3011 – Tower oscillation monitor
The tower oscillation monitor GEL 3011 measures the acceleration in the X, Y and Z direction using MEMS (Micro-Electro-Mechanical System) acceleration sensors.
GEL 2478 – ATEX speed and position sensor
The GEL 2478 speed and position sensor delivers a square-wave, voltage output from 0 Hz without pulse loss and for high-speed
GEL 2477 – 2 channel speed sensor with pulse multiplier
The GEL 2477, 2- channel speed sensor delivers a square-wave, current or voltage output and provides safe detection of very
GEL 2474 – 1 or 2 channel speed sensor
The GEL 2474, 1- or 2- channel speed sensor delivers a square-wave, current or voltage output and provides safe detection
GEL 2471 – 1 or 2 channel speed sensor
The GEL 2471, 1- or 2- channel speed sensor is used with electrically conductive measuring scales with an up to
GEL 2161 – Temperature sensor
The Gel 2161 platinum resistance thermometer Pt100 / Pt1000 can measure tube lengths from 30 mm to 140 mm, with
GEL 248 – 2-channel speed sensor
The GEL 248 is a speed sensor with HTL-/TTL-output signals. Boasting easy maintenance and wear-free operation due to contactless measurement of rotational
GEL 247 – 1 or 2-channel speed sensor
The GEL 247 is a 1 or 2 channel application approved speed sensor based on magnetic measurement principle which has maintenance-