GEL 2475FD
The GEL 2475FD CombiCODER combines the already familiar speed signalsbased on the tried and tested interference-resistant magneticscanning with state-of-the-art MEMS technology. The twosystems discussed use supply voltages that are independent ofone another and entirely without feedback.The flat spot detector accurately identifies flat spots and weldson the wheel and indicates the severity in clear, defined phases.This […]
GEL 244xm
Configurable speed and position sensor with Mitsubishi interface. MiniCODER GEL 2449M/GEL 2444M General Information ■ The measuring system comprises a MiniCODER and a target wheel for attachment to machine shafts.■ The MiniCODER scans the target wheel with magnetoresistive sensors without contact and detects the direction of rotation, speed and position.■ The MiniCODER can be adjusted […]
GEL 2740
The GEL 2740 is a multichannel rotary encoder, available in models 2701-2710. They offer unmatched versatility with mounting options for both internally and externally mounted bogies. Boasting up to 8 channels, 3 pulse numbers, and support for voltage or current output, these encoders ensure precise data acquisition for rail vehicles. With flange forms catering to […]
GEL 2475MS
The GEL 2475MS Is a multisystem sensor with various signal pattern combinations. The GEL 2475MS is a proven speed sensor using magnetic scanning delivering a wear free operations by contactless rotary motion measuring. The Gel 2475MS has a wide measuring range allowing for reliable detection of creeping without pulse loss and also for fast rotary motion. […]
GEL 3011 – Tower oscillation monitor
The tower oscillation monitor GEL 3011 measures the acceleration in the X, Y and Z direction using MEMS (Micro-Electro-Mechanical System) acceleration sensors. If the measured values exceed the factory-set limits in the X/Y direction (horizontal plane), the sensor triggers a warning signal that is output to the safety system. Product Details Redundant system with two independent CPUs […]
GEL 2478 – ATEX speed and position sensor
The GEL 2478 speed and position sensor delivers a square-wave, voltage output from 0 Hz without pulse loss and for high-speed rotation up to 20 kHz. The sensor is suitable for ATEX applications to compliance level Ex II 2G EX ib IIB T4 Gb. The speed sensor operates based on the magnetic measurement principle. It is maintenance- […]
GEL 2477 – 2 channel speed sensor with pulse multiplier
The GEL 2477, 2- channel speed sensor delivers a square-wave, current or voltage output and provides safe detection of very slow rotation from 0 Hz without pulse loss and for high-speed rotation up to 25 kHz. The speed sensor operates based on the magnetic measurement principle. It is maintenance- and wear-free and operates contact free. Measurement […]
GEL 2474 – 1 or 2 channel speed sensor
The GEL 2474, 1- or 2- channel speed sensor delivers a square-wave, current or voltage output and provides safe detection of very slow rotation from 0 Hz without pulse loss and for high-speed rotation up to 25 kHz. The speed sensor operates based on the magnetic measurement principle. It is maintenance- and wear-free and operates contact […]
GEL 2471 – 1 or 2 channel speed sensor
The GEL 2471, 1- or 2- channel speed sensor is used with electrically conductive measuring scales with an up to 4 mm air gap. It is a maintenance and wear-free operation due to non-contact measurement of rotation with, Strong reinforced walls in the sensor tube with a diameter of 20 mm provide increased protection against […]
GEL 2161 – Temperature sensor
The Gel 2161 platinum resistance thermometer Pt100 / Pt1000 can measure tube lengths from 30 mm to 140 mm, with connection with 2-, 3- or 4-wire technology. It has. a completely customisable configuration. Fire behaviour according to DIN 5510 and NF F16-101 Data Sheet Technical data GEL 2161 Fields of application Rail vehicle, automation technology […]
GEL 248 – 2-channel speed sensor
The GEL 248 is a speed sensor with HTL-/TTL-output signals. Boasting easy maintenance and wear-free operation due to contactless measurement of rotational movements. Ideal for working with tooth wheels, slotted discs, and sprockets. Datasheet Technical data GEL 248 Signal pattern V, X T Fields of application Rail vehicles, mobile machines Supply voltage 10 to 30 V DC […]
GEL 247 – 1 or 2-channel speed sensor
The GEL 247 is a 1 or 2 channel application approved speed sensor based on magnetic measurement principle which has maintenance- and wear-free operation due to a contactless measurement of rotation. The speed sensor has scans measuring scales made of ferromagnetic materials, e.g. toothed wheels and has a side measuring range for safe detection of […]