FlexSlice Thermocouple module (P367)
The 4 thermocouple inputs are brought out to a single row push-in connector. A second single row push-in connector has 4 relay outputs for control of a heater or other switched load. All 16 outputs are source (PNP) type and have electrical isolation. Outputs and power connection are via 2 x single-row plug-in screw terminal […]
FlexSlice 3 Axis Step Pulse (P375)
The P375 Flexslice 3 Axis Step Pulse Module controls up to 3 Stepper motors with Pulse/Direction/Enable or Pulse/Direction/Registration signals for each axis. It supports incremental encoders. If configured for stepper / pulse output an axis can be pulse+direction or quadrature simulated encoder output. A single MDR connector provides a reliable shielded 26 way connector for […]
FlexSlice 8 Analogue Inputs (P379)
The P379 Flexslice 8 Analogue Input module has eight programmable voltage range input terminals, each digitised to a resolution of 12 bit. The 8 single ended inputs have a common 0V potential and are brought out to a single row plug-in screw terminal block. The signal state is indicated by 8 LEDs with variable light […]
FlexSlice 8 Analogue Outputs (P378)
The P378 Flexslice 8 Analogue Output module has eight programmable voltage range output terminals, each digitised to a resolution of 12 bit. The 8 single ended outputs have a common 0V potential and are brought out to a single push-in connector. Datasheet Module current consumption (EBUS 5V) 200mA max Number of Analogue Outputs 8 Power […]
FlexSlice 16 digital inputs, NPN (P377)
The P377 digital input Flexslice connects 24V dc signals from devices on the machine to the binary control registers in the Motion Coordinator. All 16 inputs are current sourcing (NPN) type and have electrical isolation. Inputs and power connection are via 2 x single-row push-in connectorss. The Flexslice module indicates the input signal states via […]
FlexSlice 16 digital outputs, NPN (P376)
The P376 digital output slice connects the binary control signals from the Motion Coordinator to the machine’s output devices, such as relays, contactors, valves, lamps etc. at 24V dc. All 16 outputs are sink (NPN) type and have electrical isolation. Outputs and power connection are via 2 x single-row plug-in screw terminal blocks. The Flexslice […]
FlexSlice 16 digital inputs, PNP (P372)
The P372 digital input slice connects 24V dc signals from devices on the machine to the binary control registers in the Motion Coordinator. All 16 inputs are source (PNP) type and have electrical isolation. Inputs and power connection are via 2 x single-row plug-in screw terminal blocks. The Flexslice module indicates the input signal states […]
FlexSlice 16 digital outputs, PNP (P371)
The P376 digital output slice connects the binary control signals from the Motion Coordinator to the machine’s output devices, such as relays, contactors, valves, lamps etc. at 24V dc. All 16 outputs are source (PNP) type and have electrical isolation. Outputs and power connection are via 2 x single-row plug-in screw terminal blocks. The Flexslice […]
FlexSlice EtherCAT IO Coupler (P366)
The Flexslice system begins with the coupler.The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand. The bus coupler supports up to 16 input/output modules which have a positive mechanical lock and bus connector, making a reliable […]
Flex-6 Nano (P600, P601, P602, P603, P604 and P605)
The Flex-6 Nano is a powerful DIN rail mounted stand-alone flexible and compact Motion Coordinator. Its on board memory can be expanded to 32 GByte using a Micro SD card. The Flex-6 Nano can be used as a stand-alone controller or can “plug” straight into our EtherCATFlexslice System allowing expansion of the system to include […]
