Search
Close this search box.

Euro404 / Euro408 (P831, P832, P833 and P834)

The Euro404 and Euro408 Motion Coordinators are designed to provide a powerful yet cost effective control solution for OEM machine builders

The Euro404 and Euro408 Motion Coordinators are designed to provide a powerful yet cost effective control solution for OEM machine builders that are prepared to mount the unit and provide the power supplies required. The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be […]

MC405 (P826 and P827)

MC405 Motion coordinator

The MC405 is a high specification Motion Coordinator using a high performance ARM11 processor, with five flexible axis ports and four Voltage outputs. The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be used as pulse and direction with stepper or servo drives or […]

MC508 (P848 and P849)

The MC508 is a high specification Motion Coordinator using an ARM Cortex A9 800 Mhz Processor, with 8 Voltage outputs & 8 flexible axis ports

The MC508 is a high specification Motion Coordinator using a high performance ARM Cortex A9 800 Mhz Processor, with eight Voltage outputs and eight flexible axis ports, that can be configured for up to sixteen pulse and direction output axes or eight closed loop servo axes. It boasts 128 MBytes of RAM; 32 of which […]

MC4N-RTEX (P906, P907, P908, P909, P910)

The MC4N-RTEX extends the MC4N range of Motion Coordinators for networked drives which started with the MC4N-ECAT Motion Coordinator

MC4N-RTEX. It is dedicated to running remote servo drives via Panasonic’s RTEX Real Time EXpress automation bus. It is based on an up-rated version of the 532MHz ARM processor with VFP3 and  is available with configurations from 2 to 32 axes making it ideal for high axis count machines or robotic applications. The MC4N-RTEX supports […]

MC664 and MC664X (P891 P862)

The new MC664 single axis core A9 processor. The P861 MC664 Single Core Motion Coordinator is a “drop-in” replacement for its predecessor the MC464 Configure the controller functionality and connectivity by attaching up to 7 half-height expansion modules or 3 full-height expansion modules

The new MC664 single axis core A9 processor. The P861 MC664 Single Core Motion Coordinator is a “drop-in” replacement for its predecessor the MC464 Configure the controller functionality and connectivity by attaching up to 7 half-height expansion modules or 3 full-height expansion modules. Using the expansion modules allows the MC664 to support up to 64 […]

MC6N-ECAT (P960 P961 P962 P963 P964 P965)

The MC6N supports up to 64 axes of motion with 64 bit integer position registers for ultra precise axis resolution.

The MC6N supports up to 64 axes of motion with 64 bit integer position registers for ultra precise axis resolution. EtherCAT slave drives and I/O can be connected and run in cyclic synchronous position, speed or torque modes provided these are supported by the drive. The built-in Ethernet port allows programming and connection of common […]

Flex-6 Nano (P600, P601, P602, P603, P604 and P605)

Flex 6 Nano Integrated EtherCAT Controller

The Flex-6 Nano is a powerful DIN rail mounted stand-alone flexible and compact Motion Coordinator. Its on board memory can be expanded to 32 GByte using a Micro SD card. The Flex-6 Nano can be used as a stand-alone controller or can “plug” straight into our EtherCATFlexslice System allowing expansion of the system to include […]

PC-MCAT 64 (P760)

Trio’s PC-MCAT 64 is an innovative “Motion + PC Solution”. A powerful quad core Intel Atom processor is used to drive both a high performance motion controller and a compact PC that can run user applications under Windows. The PC-MCAT software uses a real-time extension to allow both Windows and the motion controller to run […]