The new GEL 2311 kit-encoder acquires the absolute rotor position precisely and can be flexibly adapted to any drive. They comprise a ferromagnetic measuring scale and an electronic scanning unit.
They provide the position data via the synchronous-serial interface according to SSI protocol as binary or gray code or using the BiSS protocol. In addition to the SSI or BiSS signals, analogue signals are output.
Features
- Magnetic multiturn absolute rotary encoder with electronic gear
- Mounting kit without bearings in two designs for direct installation in motors
- High resolution
- Extended temperature range
- With SSI or BiSS interface
- Additional analogue output sin/cos differential signals 1 Vpp128 periods per turn
| Technical data | GEL 2311-A |
|---|---|
| Fields of application | Drive technology, robotics |
| Hollow shaft diameter | 18, 23, 25 mm |
| Supply voltage | 5 to 30 V DC ± 5% |
| Output signal | sin/cos differential signals 1 Vpp 128 periods per turn |
| Temperature range | -40 °C to +120 °C |
| Design | open scanning unit with mounting plate |
| SSI data transmission | 29 bits 17 bits single turn 12 bits multi turn |
| Technical data | GEL 2311-B |
|---|---|
| Fields of application | Drive technology, robotics |
| Hollow shaft diameter | 40, 50, 65, 78 mm |
| Supply voltage | 5 to 30 V DC ± 5% |
| Output signal | sin/cos differential signals 1 Vpp 128 periods per turn |
| Temperature range | -40 °C to +120 °C |
| Design | scanning unit in housing |
| SSI data transmission | 32 bits, 17 bits single turn, 13 bits multiturn, 1 error bit, 1 warning bit |