NEW firmware update for TRIO’s Motion Coordinators
Trio have released a new firmware update, version 2.0304 for all Motion Coordinators in the MC4, 5 and 6 ranges apart from the MC464. What can we expect with the new Firmware 2.0304 update? There has been an optimization of the Uniplay HMI, including new HMI disconnect alerts and a reduction in CPU usage […]
NEW firmware update for TRIO’s Motion Coordinators
Trio have released a new firmware update, version 2.0304 for all Motion Coordinators in the MC4, 5 and 6 ranges apart from the MC464. What can we expect with the new Firmware 2.0304 update? There has been an optimization of the Uniplay HMI, including new HMI disconnect alerts and a reduction in CPU usage […]
FlexSlice 3 Axis Step Pulse (P375)
The P375 Flexslice 3 Axis Step Pulse Module controls up to 3 Stepper motors with Pulse/Direction/Enable or Pulse/Direction/Registration signals for each axis. It supports incremental encoders. If configured for stepper / pulse output an axis can be pulse+direction or quadrature simulated encoder output. A single MDR connector provides a reliable shielded 26 way connector for […]
Euro404 / Euro408 (P831, P832, P833 and P834)
The Euro404 and Euro408 Motion Coordinators are designed to provide a powerful yet cost effective control solution for OEM machine builders that are prepared to mount the unit and provide the power supplies required. The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be […]
MC403 / MC403Z (P821, P822, P823, P824 and P825)
The MC403 is a high specification Motion Coordinator using a high performance ARM11 processor, with three flexible axis ports and two Voltage outputs. The built-in Ethernet port allows programming and connection of common HMI and PLC protocols directly to the MC403. User programs can be written in Trio’s established multi-tasking TrioBASIC language using the powerful […]
MC405 (P826 and P827)
The MC405 is a high specification Motion Coordinator using a high performance ARM11 processor, with five flexible axis ports and four Voltage outputs. The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be used as pulse and direction with stepper or servo drives or […]
MC508 (P848 and P849)
The MC508 is a high specification Motion Coordinator using a high performance ARM Cortex A9 800 Mhz Processor, with eight Voltage outputs and eight flexible axis ports, that can be configured for up to sixteen pulse and direction output axes or eight closed loop servo axes. It boasts 128 MBytes of RAM; 32 of which […]
MC664 and MC664X (P891 P862)
The new MC664 single axis core A9 processor. The P861 MC664 Single Core Motion Coordinator is a “drop-in” replacement for its predecessor the MC464 Configure the controller functionality and connectivity by attaching up to 7 half-height expansion modules or 3 full-height expansion modules. Using the expansion modules allows the MC664 to support up to 64 […]
MC6N-ECAT (P960 P961 P962 P963 P964 P965)
The MC6N supports up to 64 axes of motion with 64 bit integer position registers for ultra precise axis resolution. EtherCAT slave drives and I/O can be connected and run in cyclic synchronous position, speed or torque modes provided these are supported by the drive. The built-in Ethernet port allows programming and connection of common […]
Flex-6 Nano (P600, P601, P602, P603, P604 and P605)
The Flex-6 Nano is a powerful DIN rail mounted stand-alone flexible and compact Motion Coordinator. Its on board memory can be expanded to 32 GByte using a Micro SD card. The Flex-6 Nano can be used as a stand-alone controller or can “plug” straight into our EtherCATFlexslice System allowing expansion of the system to include […]
PC-MCAT 64 (P760)
Trio’s PC-MCAT 64 is an innovative “Motion + PC Solution”. A powerful quad core Intel Atom processor is used to drive both a high performance motion controller and a compact PC that can run user applications under Windows. The PC-MCAT software uses a real-time extension to allow both Windows and the motion controller to run […]