Have you seen our article on the MACK Tron servo motor in the latest issue of Industrial Technology magazine?
A new range of ultra-compact servo motors with integrated drives has been launched by Motor Technology. The new Mack-Tron motors, manufactured by Axor Industries, have been designed to satisfy the demands for quick and simple cabling with an excellent performance to size ratio. Ideally suited for decentralised applications, the ultra-compact format allows for installation where […]
MicroSPEED plus – panel mount DC servo drives up to 4kW (MCSP)
The MICROSPEEDplus® servo amplifiers are ultra compact modules, the ideal solution for incremental motion control, velocity loop and positioning systems which require fast response, high torque at low speed, smooth speed control and high reliability. Power supply from 60 to 200 VDC with output current up to 20 Amps continuous / 40 Amps peak. Tacho-generator, […]
New Motion Coordinators run remote servo
Trio has launched a new concept in high performance Motion Coordinators dedicated to running remote servo and stepper drives via the EtherCAT real time automation bus. Based on an up-dated version of the 532MHz ARM 11 processor the new MC4N Mini EtherCAT Master is ideal for high axis count machines or robotic applications. The MC4N […]
LSN series brushless servomotor
The LSN synchronous servomotors from LTi are brushless three-phase motors for high-end servo applications and are available in all speed and voltage variants furthermore they are particularly suitable for positioning tasks on machine tools, industrial robots, transfer lines, etc., as well as for applications with high demands on dynamic performance and stability. The standard models […]
MackMOTOR Brushless Servo motor (MKM)
The new MACK MOTOR range of sinusoidal Brushless Servo Motors (8 poles) are compatible with AXOR’s servo drives Mack Drive, MiniMagnum and Magnum 400 and are available with medium or high inertia rotors. Torque range is from 1.0 to 11 Nm. In conjunction with the MACK DRIVE servo motor drives, they offer an extremely low-cost […]
KEBA – Single axis servo drive
The AC-powered ServoOne single-axis servo is suitable for a broad spread of applications thanks to its very wide power output range. From handling systems to complex test rigs, there are no limits to the diversity of applications covered. Standard Features The fluid-cooled model greatly enhances performance. Protection against overheating due to malfunctions in the fluid […]
ACM2n series, brushless servo motor
The ACM2n servo motors from ICPE are high performance, low inertia, ac brushless synchronous servo motors. The ACM2n range offers a great price/performance ratio but, remains flexible for specific customer demands. A wide variety of options are available to suit virtually any application. They are particularly suitable for positioning tasks on machine tools, industrial robots, […]
MC-BL, short-stack pancake style brushless servo motor
The MC-BL motor series from Mattke are permanent magnet synchronous servo motors, designed in a very short mounting form. Thanks to the special construction of the motor flange they replace the formerly common disk armature ( aka pancake) motors from the likes of PARVEX, AXEM, SERVALCO, ABB, BBC and MAVILOR without any further mechanical modifications. […]
Mack UniNANO
AXOR’s Mack UniNANO (MKUN) builds on the Mack NANO platform and adds drive is an ulta compact, multi-function module for DC powered applications up to 2.5kW. Supply voltage is from 12 to 140 V and drive output is up to 35 Amps continuous, 70 Amps peak. Axor’s state of the art technology in electronics, design […]
OS10/LS10 series, open frame micro-stepping drives
The OS10 series offers an excellent price-performance ratio. The drivers are mountable through 4 holes placed on the corners of the board. The connection of the signal and power cables is through screw terminal blocks suitable for 2,5mm2 wire size. The diagnostics are accurate and the setting is quick and simple thanks to the graphic […]
MackINDY
Unlike the MACK DRIVE multi-axis servo drive range, the AXOR’s MACK Indy is designed with low axis count applications in mind. The drives are designed for a direct-on-line 230Vac, 50/60Hz single phase input and don’t require an expensive 24Vdc power supply for the logic circuit. The MACK INDY range is complemented by a range of 10 […]
MackDRIVE + MackPOWER
The MACK system is based on a linked, modular design, with no fixed mechanical connection between the modules. All connections are over link-cables. EMC line filter, in-rush and regen circuits are all provided on the MACK POWER module and shared by the connected MACK DRIVE units. Standard Features • Several DRIVES powered by one […]
Axor’s Mack Drive reduces costs with compact, centralised control
The innovative new MACK drive system, from Axor Industries, reduces cost by sharing the incoming supply across multiple axes, removing the need for filtering, power conversion and regeneration circuitry on individual drives, and reduced processor costs due to centralised control. The MACK system is based on a linked, modular design, with no fixed mechanical connection between the modules. All […]
Lenord+Bauer Product Overview Brochure
This 40-page brochure from Lenord+Bauer provides detailed technical information on the company’s entire range of products for the following: • Position acquistion • Speed measurement • Rotational speed measurement • Temperature measurement • Open loop control/closed loop control positioning • Adjustment positioning • Acceleration measurement • Mileage acquistion As Lenord+Bauer’s UK agents please do not […]
What do the modern 4 to 20mA loop and a pneumatic control system have in common?
The 4 to 20mA loop is currently the most common signal standard in modern use, but inherent within it is the ratio of 1:5 that was present in old pneumatic control systems. In the 4 to 20mA loop 4mA represents 0 and 20mA is 100%. On this scale 12mA, the halfway point between 4 and […]
Legacy products – what to do with them.
Motor Technology has over 30 years of involvement in the servo, motion control and automation industry. As time has moved on so have we, but we haven’t forgotten our past and our valued customers that have called on our know-how and expertise over the years. Part of our team specialises in providing spares, repairs and sourcing […]
ICPE – ACM2n, discontinued Servo Motor still available
We’re pleased to announce that we’ve been appointed by ICPE to provide sales, service and support for its popular ACM2n range of servo motors following news that some suppliers have either discontinued it or are phasing it out slowly. We will now provide the full catalogue range of products, with exactly the same electrical and […]
Factfile: when are Steppers better than Servos?
Despite many claims to the contrary servo motors do not necessarily provide the best performance on every application. The structure of a stepper motor means that its positions are made up of discrete steps in its revolution cycle. If an application requires very good stand-still stability, like the positioning of a vision system for instance, […]
Super Metering Pumps – Fuji-Techno
Super Metering Pumps are precision instruments for feeding liquids accurately, at a pre-determined volume, into a process or system. The accuracy is essential for applications such as micro-reactors and continuous flow reactors. The Fuji-Techno Industries Super Metering Pumps offer precise delivery of liquid without the occurrence of cavitations (pulsation). A specially designed cam box makes […]
Time to ditch ‘urban myth’ about British Manufacturing says EEF
Consumers are being urged to ditch urban myths and misconceptions about British manufacturing after research showed that three quarters (74%) mistakenly believe that the UK used to manufacture more goods 30 years ago (in the 80s) than it does today. The findings, released by EEF, the manufacturers’ organisation, reveal that while consumers are supportive of British […]