home

 

download PDF

Motor Technology - Servostar 200
request details

digital servodrive for operation from DC and AC 

view printer friendly page  

 

 

 

SERVOSTAR 200The SERVOSTAR® 200 brushless servo drives push high performance servo technology into lower power applications than was previously possible without having to compromise on reliability or package size.

 

Couple a SERVOSTAR® 200 drive with a AKM servo motor for a complete servo control solution designed to excel in applications such as semiconductor fabrication, electronic assembly, packaging, medical, and woodworking equipment.

The SERVOSTAR® 200 servo drives are the first all digital industrial drives with a velocity loop bandwidth up to 800 Hz offering unmatched system throughput and simplified tuning.

High resolution (24 bit) feedback and high performance 3-5 kHz current loop bandwidth provide smooth motion and rapid start and stop action to optimize machine performance. Smart feedback and industry leading high bandwidth deliver fast and accurate commissioning by eliminating the need for servo loop tuning in most applications.

Separate "Keep Alive" power input allows rapid recovery from emergency stop conditions. Optically isolated inputs/outputs, positive locking connectors and full fault protection promise long machine life and immunity to accidental damage. A single motor power/feedback cable simplifies connectivity. All connectors and LED status indicators are easily accessible from the front of the drive.

         (pending)

 

Highlights

bullet

DC or AC input voltage:
DC type : 20V ... 90V
AC type : 110V ... 240V, 50/60 Hz

bullet

Highest performance all digital servo in the industry

bullet

Fully configurable via RS232 interface

bullet

Operation from a PC via setup software

bullet

Easy set up and tuning with Smart Feedback Device

bullet

Optimized performance with AKM motors

bullet

Rugged optically isolated I/O

bullet

UL508C recognition, CE (EN50178, EN61800-3)

bullet

Very compact footprint

bullet

Full fault protection

bullet

Torque and Velocity control standard

bullet

Optional CANopen or DeviceNet Position Control

 

Increased Machine Throughput and Longer Life

Servo system performance is synonymous with machine throughput. The SERVOSTAR® 200 family takes servo performance to new heights.

bullet

Industry-leading current loop bandwidth up to 5KHz and velocity loop bandwidth up to 800Hz means machine throughput can be increased by as much as 2 to 3 times.

bullet

Robust design including full fault protection, locking connectors and optical isolation promise greater machine “up-time”.

bullet

Smooth motion, a benefit of sinusoidal current control and high resolution (24 bit) feedback minimizes harsh torque disturbances that can cut short the life of mechanical components.

bullet

Both the AC and the DC input drives are equipped with separate control power input to speed recovery from “E-Stop” conditions.

 

Reduced Engineering and Support Time

Simplified tuning, friendly Graphical User Interface and shared components with Stepper products.

bullet

Windows-based Graphical User Interface models the tree format found in Explorer so learning is quick and easy.

bullet

Easy to debug with full fault diagnostics reduce engineering support time.

bullet

Shares option cards, electrical I/O, and GUI components with the P7000 stepper drive family reducing the time required to learn new products.

 

CE- / UL- conformity

SERVOSTAR® meets all relevant standards :

bullet

EMC Directive 89/336/EWG

bullet

Low Voltage Directive 73/23/EWG

bullet

UL / cUL pending

 

Drive names

DC Drive
Modular micro servodrive for operation with servomotors. This device is powered at 20V DC to 90 V DC.
S20330-VTS : 3A cont / 9A peak / base Velocity / Torque drive / support Halls or SFD
S20330-CNS : 3A cont / 9A peak / CANopen / Indexing drive / support Comcoder or SFD
S20330-DNS* : 3A cont / 9A peak / DeviceNet / Torque drive / support Comcoder or SFD
S20630-VTS : 6A cont / 18A peak / base Velocity / Torque drive / support Halls or SFD
S20630-CNS : 6A cont / 18A peak / CANopen / Indexing drive / support Comcoder or SFD
S20630-DNS* : 6A cont / 18A peak / DeviceNet / Torque drive / support Comcoder or SFD

AC Drive
Self contained micro servo drive for operation with servomotors. This device is powered at 120 or 240 V AC.
S20260-VTS : 1.5A cont / 4.5A peak / base Velocity / Torque drive / support Halls or SFD
S20260-CNS : 1.5A cont / 4.5A peak / CANopen / Indexing drive / support Comcoder or SFD
S20260-DNS* : 1.5A cont / 4.5A peak / DeviceNet / Torque drive / support Comcoder or SFD
S20360-VTS : 3A cont / 9A peak / base Velocity / Torque drive / support Halls or SFD
S20360-CNS : 3A cont / 9A peak / CANopen / Indexing drive / support Comcoder or SFD
S20360-DNS* : 3A cont / 9A peak / DeviceNet / Torque drive / support Comcoder or SFD
* available in 2004

 

Technical data

 

  SERVOSTAR®

Rated data

DIM 20330 20630 20260 20360

Rated supply voltage

V 20... 90V DC 0...264V AC

Control logic

V 10... 90V DC 85...265V AC

Rated output current (rms value, ± 3%)

A 3 6 1,5 3

Peak output current (± 3%)

A 9 18 4,5 9

Peak time

s 1 1 3 3

Current loop Bandwidth max.

kHz 5 5 3 3

Velocity loop Bandwidth max.

Hz 800

Update rate

MHz 1,25

 

Dimension drawings

 

    SERVOSTAR® 200

Dimensions

DIM DC DC & option AC

Height

mm 152,4 152,4 175

Width

mm 28,7 48,3 54,8

Depth without connectors

mm 101 101 132

Depth with connectors

mm ~130 ~130 ~180

 

Wiring diagrams