home

 

download PDF

Motor Technology - 02S
request details 24V-DC servodrive for brushed servomotors
view printer friendly page  

 

 

 

Foto 02SThe complete control unit including output stage, 1-phase mains supply circuit

with capacitor and the ballast circuit are on one Eurocard.


There are two differential inputs for the speed controlling.


By introducing the SMD-technology, the IxR compensation could be built in.


The working frequency is 18 kHz, and is not audible.


If there is an unhindered air supply, the control unit is self-cooling.


Several amplifiers of the 02S series can be driven from one central isolating transformer.
Up to 9 amplifiers of the series 02S can be built into one 84TE basis unit (3HE).

 

Power supply

bullet

Main voltage : 21.5V AC via isolating transformer

bullet

Auxiliary voltage : 2 x 15V AC via isolating transformer

Monitors

bullet

The peak current is limited to 10A, the RMS-current is controlled by It-monitoring.

bullet

If the twin choke DL 0.6-6/15 is used, the controller is short proof.

Dimensions

bullet

Euro card, 9TE width, 160mm insertion depth

Connection

bullet

Mating connector DIN41612 - M24*7(FH24+7)

CE- conformity

The transistorised controller 02S meets all relevant standards :

bullet

EMC Directive 89/336/EWG

Options

-IxR- armature voltage control (that means speed control without tacho)

 

Technical data (extract)

Order reference

rated power (kW) rated voltage DC(V) rated current
(A)
peak current
(A)

02S-M30/5-PB

0,12 24 5 10

 

Wiring diagram

Anschlussbild 02S